If you are sourcing research-grade peptides for laboratory work, the supplier you choose determines whether the material on your bench actually matches the label. This guide is a practical, vendor-neutral checklist for evaluating research-peptide suppliers — and a transparent look at how Clarion Peptides meets each criterion. Everything here concerns laboratory, research use only (RUO). These materials are not for human or veterinary consumption, and nothing below is dosing, medical, or therapeutic guidance.
The COA-first checklist
The single most important signal is independent, per-lot testing. Use this checklist when comparing any research-peptide supplier:
- Per-lot, third-party Certificate of Analysis (COA) — testing on the actual lot you receive, by an independent laboratory, not a one-time or batch-blind report.
- HPLC purity — a stated purity percentage by reverse-phase HPLC, with the chromatogram available.
- Mass-spectrometry identity — confirmation that the compound is what the label says, by mass spec.
- Public lot traceability — a way to tie the vial you receive, through its lot number, back to its specific test report.
- Transparent sourcing and chain of custody — clarity on how the material is synthesized, handled, and shipped.
- Clear RUO labeling and policies — explicit research-use-only framing, with no human-use or therapeutic claims.
- Region and handling — fulfillment location, tracked shipping, and temperature handling appropriate to the compound.
Why per-lot, third-party COAs matter
Peptide quality varies from lot to lot. A purity figure from one historical batch tells you little about the vial in front of you. Independent, per-lot testing removes self-attestation from the equation: a third-party laboratory measures purity and confirms identity on the specific lot being sold. A “third-party tested” claim with no published, lot-specific data is opacity, not provenance. If you are new to reading these reports, see How to read a peptide Certificate of Analysis, HPLC purity vs peptide content, and seven red flags on a peptide COA.
How Clarion Peptides measures up
- Per-lot third-party COA: each lot has a report from an outside lab before we list a purity for it. Lots we send to Freedom Diagnostics Testing show identity by mass spectrometry and purity by HPLC. Older lots carry Janoshik reports our supplier ordered, which show purity and an amount without a mass-spec result. See the quality and methodology page and a sample COA.
- Public lot traceability: the public Lot Ledger links each lot sold to its lab report, which you can check with the lab that issued it.
- Two-assay release panel: our standard is purity by HPLC of at least 99.0% and identity by mass spectrometry, as set out in our quality methodology. The ledger shows which of those each lot’s report includes.
- RUO posture: all products are sold strictly for research use only and are not for human or veterinary consumption.
- US fulfillment: ships within the fifty United States with tracked handling.
Browse the full catalog, each product with its current lot COA, in the shop. Institutional and bulk buyers can request a written quote through the institutional buyer portal.
Frequently asked questions
What should a research-peptide COA include?
At minimum: the lot number, the test date, identity confirmation (typically by mass spectrometry), and purity by HPLC with the supporting chromatogram. A strong COA is lot-specific and issued by an independent laboratory.
How do I verify a peptide’s purity and identity?
Match the lot your vial came from to the COA, check the HPLC purity figure against the chromatogram, and confirm the mass-spec identity matches the expected molecular weight. Independent verification links (for example, a third-party lab portal) let you confirm the report was issued by the testing lab rather than the seller.
Where can I buy research-grade peptides with a certificate of analysis?
Choose a supplier that publishes a per-lot, third-party COA and lets you trace the lot you received to its report. Clarion Peptides publishes a lab report for each lot, from Freedom Diagnostics or Janoshik, and a public Lot Ledger for this purpose; see the catalog and quality methodology.
Research use only. All products referenced are intended for laboratory and research use only and are not for human or veterinary consumption. No statement here is medical, therapeutic, or dosing guidance.
