Sodium and Potassium Adducts on a Peptide COA

For research use only. Not for human or animal consumption.


Two ions that fail the check, correctly

A certificate of analysis for a 4,731-dalton peptide lists four mass-confirmation ions. Run the reconstruction this series teaches — multiply the printed m/z by the charge, subtract the protons — and two of them behave:

1,577.800 × 3 − (3 × 1.008)  =  4,730.38     0.95 daltons under the reference
1,183.500 × 4 − (4 × 1.008)  =  4,729.97     1.36 daltons under the reference

The other two do not:

1,585.400 × 3 − (3 × 1.008)  =  4,753.18     nearly 22 daltons over
1,193.000 × 4 − (4 × 1.008)  =  4,767.97     nearly 37 daltons over

A reader who has just learned the reconstruction stops here, because two of the four ions on the document appear inconsistent with the stated compound. They are not. They are alkali-metal adducts, and they appear on certificates everywhere. This page is about reading them.

What an adduct is

Electrospray ionisation usually puts charge on a peptide by adding protons. But sodium and potassium ions are everywhere in trace amounts — glassware, solvents, buffers — and either one can take a proton’s place on the molecule. The substitution changes the mass the instrument sees. A sodium ion adds 21.98 daltons over the proton it displaces (22.99 − 1.01); a potassium ion adds 38.09 (39.10 − 1.01). The molecule underneath is the same molecule.

An ion carrying one sodium in place of a proton at charge 3+ is written [M+2H+Na]3+. One carrying a potassium at 4+ is written [M+3H+K]4+. The certificate examined in this series lists an [M+3H+K]4+ species in its ion list.

The two checks that identify an adduct

The spacing check. An adduct ion tends to appear beside its plain protonated partner at the same charge state. Subtract the two printed values and multiply by the charge:

1,193.000 − 1,183.500  =  9.500 m/z units
9.500 × 4 charges      =  38.0 daltons

Potassium adds 38.09 over a displaced proton. The spacing identifies the 1,193.000 ion as the potassium adduct — a fraction of a dalton of scatter, the same scatter the other printed values on the document carry. (Reconstructed as if plainly protonated, the same ion reads 36.6 over rather than 38.1 — the printed value’s own m/z offset times four charges, the scatter the residuals guide in this series covers.)

The excess check. When there is no adjacent partner to measure against, reconstruct the ion as if it were plainly protonated and look at the excess over the reference mass:

1,585.400 × 3 − 3.024  =  4,753.18
4,753.18 − 4,731.33    =  21.85 daltons over

Sodium adds 21.98. The excess identifies the 1,585.400 ion as the sodium adduct, [M+2H+Na]3+, which calculates to 1,585.45 against a printed 1,585.400.

Run whichever check the document allows. Both are arithmetic on printed numbers and the published reference mass — no software, no trust in labels.

Why the label on the row is not the determination

Certificates routinely annotate adduct ions loosely — a species written as if it were plainly protonated when its arithmetic says otherwise. That is worth knowing in general: the charge number in an annotation supplies the divisor and is usually dependable; the species label — how many protons, whether a metal sits in for one — is what the reconstruction itself confirms or corrects. On any certificate, from any laboratory, the arithmetic is the determination and the annotation is a note.

The rule that generalises

An ion that does not reconstruct to the neutral mass is not automatically a discrepancy. Before reading it as one, check the two spacings:

  • +21.98 daltons (per displaced proton): sodium.
  • +38.09 daltons (per displaced proton): potassium.

An ion tens of daltons over the reference that matches neither spacing, on a document whose other ions reconstruct cleanly, is a question for the issuing laboratory. An ion that matches one of them is electrospray behaving normally.

Common questions

Do adducts mean the sample is contaminated? No. Trace sodium and potassium are ordinary in any laboratory workflow, and adduct ions form in the source during ionisation. The molecule they carry is the same molecule.

Why does the certificate list adduct species at all? Because the instrument records them. Reporting them is a sign the ion list reflects what was measured rather than what was expected.

Can an adduct ion be used to confirm identity? It adds consistency: the spacing between an adduct and its protonated partner is itself a check on the charge assignment and the neutral mass. The primary reconstruction still rests on the protonated ions.

Where do the 21.98 and 38.09 figures come from? Atomic masses: sodium 22.99 minus a displaced proton at 1.01, and potassium 39.10 minus the same.


Part of Clarion’s certificate-literacy series. The companion guide “Reading a Retatrutide certificate” works the full reconstruction; “Why every printed m/z sits a fraction low” covers the residuals.

For research use only. Not for human or animal consumption.