For research use only. Not for human or animal consumption.
The short answer
To check a peptide COA, find the same report on the lab’s own website. Look for the lab’s name and a code on the certificate. Type the lab’s web address yourself. Then enter the code, or scan the QR code. Check that the client, compound, lot, purity and dates match the copy you were sent. If they differ, trust the lab’s copy.
Lab by lab: where to check
These are the six labs we found on certificates from US research-peptide sellers when we re-checked them on November 5, 2026. Type the address under “Check it at” yourself. Don’t rely only on a “verify” link on a seller’s site: a link can point to a look-alike page.
Janoshik Analytical
- Find on the certificate: A verification code
- Check it at: verify.janoshik.com
- Seen on reports from (Nov 5, 2026): Clarion Peptides (7 reports)
Freedom Diagnostics Testing (Franklin, Tennessee)
- Find on the certificate: The Search Code in the top-right table, such as Clar2607240045. It is the first four letters of the client’s name plus the accession number.
- Check it at: The COA Lookup on freedomdiagnosticstesting.com. It also searches by accession number or company name.
- Seen on reports from (Nov 5, 2026): Protide Health; Clarion Peptides
Vanguard Laboratory
- Find on the certificate: The report number
- Check it at: verifiedbyvanguard.com/search
- Seen on reports from (Nov 5, 2026): Core Peptides
MZ Biolabs (Tucson, Arizona)
- Find on the certificate: A QR code
- Check it at: Scan it. The page that opens should be on mzbiolabs.com.
- Seen on reports from (Nov 5, 2026): Biotech Peptides; Limitless Life (newer lots)
North American Diagnostics
- Find on the certificate: A Test ID, such as NAD-0037963
- Check it at: nadiagnostics.com/verify (it takes a Test ID or Batch ID)
- Seen on reports from (Nov 5, 2026): PS Peptides
TrustPointe Analytics (Dorr, Michigan)
- Find on the certificate: The key printed next to “Verify at TrustPointeLIMS.com”
- Check it at: trustpointelims.com (enter the verification key)
- Seen on reports from (Nov 5, 2026): Limitless Life (older lots)
Seller by seller, with a source link for every cell: our vendor comparison. Labs change their websites. If a route above stops working, use the contact page on the lab’s own site and ask about the report number.
Step by step, with a real report
- Find the lab. Our Selank report names Freedom Diagnostics Testing in Franklin, Tennessee.
- Find the code. The Search Code in the top-right table is Clar2607240045.
- Go to the lab’s site yourself. Type freedomdiagnosticstesting.com and open COA Look Up.
- Enter the code. Click Look up. The report opens as a PDF on coas.freedomdiagnosticstesting.com, the lab’s own server.
- Compare five lines. Client: Clarion Peptides. Compound: Selank. Lot: SK10. Purity: 99.78%. Dates: received July 24, 2026, reported July 28, 2026. If the copy you were sent says anything else, trust the lab’s copy.
Every line of that report is explained on our Selank COA page.
What to compare, and what a match proves
- Client: the company that sent the sample. If it isn’t the seller, ask why. Seven of our own reports name our supplier, and our ledger says so.
- Compound and amount: the same compound and vial size you are buying.
- Lot or batch: the lot the seller says it shipped to you.
- Purity and identity results: the same numbers on both copies.
- Dates: the same received and reported dates.
A match proves the report is real and unchanged. It does not prove your vial came from that lot. For that, the seller has to tie your vial to the lot, with a printed lot code or a card or QR code packed with the vials, and a public ledger. Ours is the certificate card with a QR code that ships with your vials, plus the Public Lot Ledger.
Red flags
- The lab can’t find the code.
- The lab’s copy shows a different client, lot, purity or date.
- The only “verify” page is on the seller’s website, not the lab’s.
- The certificate has no lab name, no code and no QR code. Then there is nothing to check with the lab, and you are trusting the seller’s copy.
The order of operations
Most guidance about certificates of analysis is about reading them. This page is about the step before reading: getting the document from a source that the seller does not control. The order matters, because every check a certificate supports — identity arithmetic, purity, net content — assumes the document itself is the one the laboratory issued.
A certificate reaches a buyer in one of two ways. As a file forwarded by the seller — attached to an email, downloaded from a listing — or as a record retrieved from the issuing laboratory’s own systems. A forwarded PDF can be edited by anyone who handled it. A record retrieved from the laboratory’s own domain is not under the seller’s control. That difference is the whole subject.
The chain, link by link
A verifiable supply chain gives a buyer a path from the vial in hand to the laboratory’s own record, with no step resting on the seller’s say-so:
- The lot number — stated on the listing and tied to the vial you receive, either printed on the vial or on a card or QR code packed with it. It names one specific batch, not the product in general.
- The public ledger — the seller’s published index mapping each lot to its certificate. The ledger is where a listing’s claims become checkable documents.
- The accession or search code — printed on the certificate itself. It is the laboratory’s own identifier for the submission.
- The laboratory’s domain — where the accession retrieves the record from the organisation that performed the testing.
Walk the chain in that order and the seller is out of the loop by step four: the document on the screen came from the laboratory, keyed by the laboratory’s own identifier.
The domain is the load-bearing link
One caution keeps the chain honest. “Retrieved from the laboratory’s domain” only means something if the domain actually belongs to the laboratory named on the report. Lookalike domains exist in every industry; registering a plausible name is cheap. So the check has two parts, not one: retrieve the record from the issuing laboratory’s own domain, and confirm that domain belongs to the laboratory named on the certificate — from the laboratory’s own public presence, not from the seller’s links alone.
What the accountability marks settle — and what they do not
A certificate carries three marks that make it answerable: the laboratory’s name, a chemist’s signature, and the accession code that retrieves it. They are three separate checks on who stands behind the document. The name makes the report attributable to an organisation that can be contacted and asked. The signature attaches a person to the finding. The accession makes the record retrievable independently of the seller.
None of the three settles what was measured. That is the ion list’s job — whether the reconstructed mass is consistent with the stated compound, arithmetic covered elsewhere in this series. Accountability marks say who to ask; the ions say what the laboratory saw.
Dates describe a submission
A certificate records when material was received and when the report was issued. Those dates describe one submission of one sample, and nothing else. Where a date or an identifier on a product listing does not line up with the certificate, that is a question to put to the seller rather than a difference to reconcile by guessing.
Common questions
Why not just trust the PDF on the listing? Because a file that passed through the seller’s hands proves only what the seller chose to publish. Retrieval from the laboratory’s systems removes that dependency. The listing’s copy is a convenience; the laboratory’s record is the reference.
What if a certificate has no accession or search code? Then independent retrieval is not possible, and the document’s credibility rests entirely on the seller’s handling. That is worth knowing before relying on it.
What does a matching lot number prove? That the vial, the listing, the ledger and the certificate all point at the same batch. It is a consistency check on the paperwork — the chemistry inside the document still has to stand on its own.
Who is accountable if the numbers are wrong? The laboratory that issued and signed the record — which is exactly why a certificate that is attributable, signed and retrievable outranks one that is merely attached.
Part of Clarion’s certificate-literacy series. “Reading a Retatrutide certificate” works the identity arithmetic; “Sodium, potassium, and the ions that do not reconstruct” and “Why every printed m/z sits a fraction low” cover the ion list in depth.
For research use only. Not for human or animal consumption.
