|

KPV in 2026: a verification-first buying guide

For qualified researchers. Clarion Peptides products are sold for laboratory research use only. They are not for people or animals. This page is about checking a research material, not using one.

The short answer. Before you buy KPV, ask the seller for the lab report on that batch. A good report shows five things. The lab’s name is on it. The batch weighs what KPV should weigh. It says how pure the batch is, as a percent. The batch number on the report matches the number on the vial. And you can check the report with the lab, not just with the seller. If the seller cannot show you all five, buy somewhere else. The technical part below explains the numbers.

What KPV is, in plain words

KPV is a very small man-made peptide. A peptide is a tiny chain of amino acids. Amino acids are the building blocks of proteins. KPV is a chain of just 3 of them: lysine, proline and valine. They match the last 3 amino acids of alpha-MSH, a signal the body makes. It comes as a dry white powder in a small glass vial, and labs keep it frozen. Its ID number is CAS 67727-97-3.

What scientists use it for

Scientists use KPV in the lab to study how a very small peptide gets into cells. In one study, gut lining cells took KPV in through a carrier called PepT1. The team then measured the signals the cells sent. The work was done in dishes of cells and in mice. Source: Dalmasso and others, 2008 (PMID 18061177). This page is about lab research only. It does not cover studies in people. Nothing here says what KPV does in a person.

The five checks, in order (technical)

1. The laboratory is named on the certificate

“Third-party tested” names nobody. A real certificate of analysis names the laboratory that produced it, carries a report number, and the laboratory will confirm that number if you ask. If a vendor’s page says “independent lab” and stops there, stop there too. Two laboratories serve this segment with reports you can confirm directly: Janoshik Analytical, whose results are looked up by code at verify.janoshik.com, and Freedom Diagnostics Testing in Franklin, Tennessee, which publishes reports on its own database. Also check who the report was issued to. A test the vendor ordered on its own stock tells you more than one the factory ordered before the product shipped.

2. Identity by mass spectrometry, and the mass actually matches

KPV’s sequence is Lys-Pro-Val and its formula is C16H30N4O4. Its monoisotopic mass is 342.23 Da and its average mass is 342.43 Da. A mass-spectrometry result proves the vial holds the molecule on the label, and the expected numbers are fixed by the formula, so you can check them without trusting anyone. A certificate usually reports the observed value at one of the common charge states:

  • [M+H]+ near 343.23
  • [M+2H]2+ near 172.12

The certificate should say which charge state it reports, and the difference between observed and expected should be small. One KPV-specific point: because the molecule is so small, its peaks sit low on the mass scale, and the doubly charged ion can land below where some reports start. A good report still shows the [M+H]+ ion near 343.2. A report that shows only a large mass, or none at all, hasn’t confirmed KPV. Salt form matters for weight, not identity, which is why a good certificate reports identity, purity and net content separately.

3. Purity by RP-HPLC, as a main-peak percentage with the method named

Purity answers a different question from identity: how much of what is in the vial is the target peptide. The number that holds up is the main-peak area from reverse-phase HPLC, stated as a percentage, with the method printed on the certificate and the chromatogram shown. A “99%” that appears only in marketing copy is just a claim.

4. The lot code on the certificate is the lot code you receive

If the same certificate shows up for every batch, nobody tested your batch. The lot code for the vials you would receive has to appear on the certificate, exactly, and the vial size on the certificate should match the vial size you are buying. If a vendor cannot tell you which lot you would receive and show you that lot’s certificate before you pay, you are buying blind.

5. You can authenticate the certificate with the laboratory, not the seller

This is the step that takes the vendor out of the picture. Enter a Janoshik code at the lab’s own portal and compare. If the portal and the vendor’s copy disagree, the portal wins. A Freedom Diagnostics report lives on the laboratory’s own database under a search code, and the lab will confirm it. If a vendor’s certificates exist only on the vendor’s own site, all you have is a PDF.

Red flags specific to KPV listings

  • A product page that describes effects or dosing instead of chemistry. That copy tells you what the seller wants to sell, and nothing about what is in the vial.
  • A certificate that shows no mass near 343 for a product sold as KPV.
  • Purity quoted with no chromatogram and no named method.
  • A certificate whose vial size does not match the listing.
  • No lot code anywhere on the page.
  • A “verified” badge or QR code that lands on the vendor’s own page instead of a laboratory record.

Clarion’s current KPV lot, checked the same way

Read this the way you would read a competitor’s block, and check it against the laboratory rather than against us.

Lot KP10, 10 mg vials. Product page: clarionpeptides.com/product/kpv/
Laboratory Freedom Diagnostics Testing, Franklin, Tennessee. The certificate names the laboratory and names Clarion Peptides as the client: we sent the sample ourselves. Received July 24, 2026, reported July 28, 2026.
Identity Confirmed by LC-MS. The report shows [M+H]+ at 343.2 and [M+2H]2+ at 172.2, against 343.23 and 172.12 expected.
Purity 99.75% main peak by HPLC with UV detection, chromatogram on the certificate.
Net content 10.83 mg measured in a 10 mg vial.
Authentication The certificate is on the laboratory’s own database, not our server: coas.freedomdiagnosticstesting.com/Clar2607240042.pdf (search code Clar2607240042). The lot is also on the Public Lot Ledger, and the walkthrough is at clarionpeptides.com/verify/.

When lot KP10 sells out, the product page and the ledger show the next lot. If the ledger says “assay in progress” for a lot, we don’t list a purity for it.

More on reading certificates

A line-by-line guide to any peptide certificate, with a worked example: How to read a peptide certificate of analysis. Expected masses for every compound we carry: Peptide mass reference table.

Where to buy KPV, in one line

Buy the lot whose certificate you confirmed with the laboratory before paying. If that is ours, the product page is linked above. If it is someone else’s, the check works the same way.

All Clarion Peptides products are for laboratory research use only. Not for human or veterinary use. Nothing on this page is a claim about the effects of any compound.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *