Sample COAs

Sample certificates

Sample Certificates of Analysis

The short answer. A certificate of analysis (COA) is a lab’s report on one lot. This page shows two sample reports, one from each lab our lots use, and how to check each one with the lab. To check your own lot, use the Public Lot Ledger. To learn to read one, see all our lab testing guides.

Every Clarion lot gets its own Certificate of Analysis, the document this page demonstrates. Until a lot’s report is back, the Public Lot Ledger marks it “assay in progress.” Our lots carry reports from two outside laboratories: Freedom Diagnostics Testing (Franklin, Tennessee), whose tests we order ourselves, and Janoshik Analytical, whose reports for our lots were ordered by our supplier. Both publish their certificates on their own public databases, so you verify a report at the laboratory that issued it, with no Clarion intermediary in the chain.

The lot ledger names the issuing laboratory beside each lot, and every product page links to that lot’s certificate directly. Two published examples follow, one from each laboratory.

Janoshik Analytical · verify.janoshik.com

Tesamorelin 10mg. Test #78707

Identity by ESI mass spectrometry. Purity by reverse-phase HPLC. Chromatogram and integrated peak table included.

Freedom Diagnostics Testing · Franklin, TN

PT-141 10mg. Lot P41, search code Clar2607240044

Identity by LC-MS. Purity by HPLC with UV detection. Chromatogram and mass confirmation included, plus a measured net peptide content for the vial.

Or look it up yourself at Freedom’s Certificate of Analysis Lookup — search the code Clar2607240044, or search the company name Clarion Peptides to list every certificate they hold for us.

About these certificates

We do not issue COAs ourselves, by design. Self-issued certificates carry an inherent conflict of interest; the third-party laboratory’s name on the report is the point of using one. Where a certificate is commissioned by our contract synthesis partner, the supplier name on the certificate identifies the synthesis source. The lot ID on the certificate is the Clarion lot your vials were filled from.

What each section of the report shows

Identity. Mass spectrometry result

The certificate reports the observed molecular mass measured by mass spectrometry, alongside the theoretical mass for the intended compound. The match between observed and theoretical values verifies the identity of the substance in the vial, that it is, in fact, the compound stated on the label and not a structural variant or related sequence.

Purity. HPLC chromatogram

The certificate includes the underlying RP-HPLC chromatogram, not just a final purity number. The chromatogram shows the main peak together with any related substances or synthesis byproducts, so the data is auditable rather than asserted.

Peak integration table

The peak table lists the retention time and integrated area of every detected peak. The main-peak area, reported as a percentage of total integrated area, is the lot’s purity value, and it must meet Clarion’s published acceptance criterion of ≥99.0% main peak area before the lot enters inventory.

Net content, where reported

Purity is a percentage of what is in the vial; it says nothing about how much is in the vial. Freedom Diagnostics certificates additionally report net peptide content in milligrams, measured against the labelled mass. Purity and quantity are separate questions, and a certificate that answers only the first is answering half of it.

Verifying any Clarion lot

Every Clarion lot ID published on this site links directly to its certificate, and the lot ledger names the laboratory that issued it. The certificate is the document that matters, and verification is one click away.

Read the full quality methodology → · Public lot ledger →

For research use only. Not for human consumption, diagnosis, or treatment.