For qualified researchers. Clarion Peptides products are sold for laboratory research use only. They are not for people or animals. Updated November 9, 2026.
The short answer. Our current Ipamorelin lot is IP5-2026A-04. Its lab report comes from Janoshik Analytical. Our supplier ordered this test on its own batch. We did not send this sample ourselves. The vial the lab tested was labeled 10 mg. Our vials hold 5 mg. The report measured 99.765% purity and 10.80 mg of Ipamorelin. It does not print a mass-spec result. You can open the report on the lab’s own website. Below, every line is explained.
The report at a glance
| Laboratory | Janoshik Analytical |
| Report number | #109931. Verification key 4C9LZ4TDV36K. |
| Client on the report | Weiyuan Biotecnologia, our supplier. We did not order this test. |
| Batch on the report | WY20260011, the supplier’s batch number. Our ledger lists this report for our lot IP5-2026A-04. |
| Sample on the report | “Ipamorelin 10mg” |
| Dates | Testing ordered January 27, 2026. Sample received February 6, 2026. Analysis done February 19, 2026. |
| Results | Ipamorelin: 10.80 mg. Purity: 99.765%. |
| Identity | The report names Ipamorelin and gives an amount. It does not print a mass-spectrometry result, a mass spectrum or a chromatogram. |
| Lab’s own copy | verify.janoshik.com/tests/109931-Ipamorelin_10mg_4C9LZ4TDV36K |
The vial size on the report is not ours
Our Ipamorelin comes in 5 mg vials. The vial on this report was labeled 10 mg, and the lab measured 10.80 mg in it. So the amount on this report describes that 10 mg vial. It does not tell you how much is in one of our 5 mg vials.
The purity figure, 99.765%, describes the sample the lab tested. The 99.8% on our product page is this number, rounded. A report on one of our own 5 mg vials would settle both questions. This lot does not have one yet.
What the report can and can’t prove
Ipamorelin’s formula is C38H49N9O5. From the formula, its monoisotopic mass is 711.39 Da. A mass-spec result would show [M+H]+ near 712.39 or [M+2H]2+ near 356.70. This report doesn’t print one, so you can’t check the mass from it. Our Freedom reports print the mass spectrum, which lets you run that check yourself. Our peptide mass reference lists the same numbers for Ipamorelin and 21 other peptides.
Who ordered the test, and why it matters
Our supplier ordered this test on its own batch. It is a real lab report on that batch, and Janoshik’s own site confirms it. But a test the seller orders on its own stock tells you more. Most of our lots have Freedom Diagnostics reports that we ordered ourselves. This lot does not yet.
What the numbers mean
Purity is the share of the HPLC signal in the main peak. It tells you how clean the peptide is. This report gives the number without the chart behind it.
Amount is how many milligrams of Ipamorelin the lab measured in the vial it tested. That vial was labeled 10 mg, and the lab measured 10.80 mg.
How to check it with the lab
- Open the report on Janoshik’s own site: verify.janoshik.com. Or go to janoshik.com/verify/ and enter the key 4C9LZ4TDV36K.
- Compare it with the copy you were given. If the two differ, the lab’s copy wins.
- Match the lot. Our vial labels don’t carry a lot code, because the label material can’t be printed on. Instead, a certificate card ships with the vials, and its QR code opens the lab report for the lot you received. The Ipamorelin product page and the Public Lot Ledger also list lot IP5-2026A-04.
More on reading reports
A line-by-line guide to any peptide certificate: How to read a peptide COA. How to check any report with its lab: clarionpeptides.com/verify/.
When this lot sells out, the product page and the ledger show the next lot first. All Clarion Peptides products are for laboratory research use only. Not for human or veterinary use. Nothing on this page is a claim about the effects of any compound.
