Reading a Janoshik report, line by line: what each field shows, and what it leaves out
For qualified researchers. Clarion Peptides products are sold for laboratory research use only. They are not for people or animals. Updated November 10, 2026.
The short answer. A Janoshik report is one page. It names who ordered the test, what the vial was called, the batch, the dates, and the results the lab measured. It gives a key so you can check it on the lab’s site. For our lots, it does not print a mass-spec result, a chromatogram or a pass limit. Below, every line is explained.
A real report, field by field
This is the report for our current Ipamorelin lot. Our supplier ordered it before the product reached us.
| On the report | What it means |
| Task Number #109931 |
The report’s ID at the lab. Use it with the key below. |
| Testing ordered / Sample received 27 Jan ’26 / 06 Feb ’26 |
When the order was placed and when the vial reached the lab. |
| Client Weiyuan Biotecnologia Co., Ltd.com |
Who ordered and paid for the test. Here it is our supplier, not us. |
| Sample Ipamorelin 10mg |
The name and label size the client gave the vial. Not a test result. |
| Manufacturer Weiyuan Biotecnologia Co., Ltd.com |
Who the client says made it. |
| Batch WY20260011 |
The client’s batch number. A seller’s own lot code may differ. |
| Sample description See picture or pictures attached. |
The vial photo on the report page. |
| Tests requested Assessment of a peptide vial or vials. |
What the client paid for. |
| Results Ipamorelin 10.80 mg; Purity 99.765% |
The measured numbers. |
| Comments (blank) |
Notes from the lab, if any. |
| Analysis conducted 19 FEB 2026 |
When the lab ran the test. |
| Verification key 4C9LZ4TDV36K |
Enter it at janoshik.com/verify/, as the report says. |
What to check first
- Open it on the lab’s site. Each report has its own page on verify.janoshik.com, with the report image and a vial photo. If the copy a seller gives you differs from the lab’s copy, the lab’s copy wins.
- Read the Client line. A test the seller ordered on its own stock tells you more than one its supplier ordered on a supplier batch. All of our current Janoshik reports were ordered by our supplier. Why that matters.
- Compare Sample with what you bought. Our Ipamorelin report tested a vial labeled 10 mg. Our vials hold 5 mg. Our Ipamorelin COA page explains what that means.
- Match the batch to the lot. Our ledger lists which report goes with each of our lots.
What these reports leave out
- No mass-spec result. The report names the compound and gives an amount, but prints no measured mass, so you can’t check identity from it. See our peptide mass reference for the numbers a mass result should show.
- No chromatogram. The purity is a number without the chart behind it.
- No method or limit. It does not name the method or print a pass limit. See Is 99.0% a pass?
- Some report only an amount. Our NAD+ and BPC-157 + TB-500 reports give amounts and no purity figure.
- No endotoxin result. Endotoxin needs its own test. See endotoxin in research peptides.
Janoshik offers other test types too. Its public list of tests, at public.janoshik.com, shows endotoxin, sterility and heavy-metal screens, among others. That list shows tests that clients chose to make public, and the lab notes that it does not endorse them. None of our reports includes those tests.
How our newer reports differ
For newer lots, we send samples to Freedom Diagnostics Testing ourselves. Those reports name us as the client and show identity by LC-MS, purity by HPLC with the chromatogram, and net content. You can compare the two kinds side by side: the BPC-157 COA page (Janoshik) and the Selank COA page (Freedom). How to check a report with each lab: lab-by-lab guide.
All Clarion Peptides products are for laboratory research use only. Not for human or veterinary use. Nothing on this page is a claim about the effects of any compound.
