SS-31 in 2026: a verification-first buying guide
For qualified researchers. Clarion Peptides products are sold for laboratory research use only. They are not for people or animals. This page is about checking a research material, not using one.
The short answer. Before you buy SS-31, ask the seller for the lab report on that batch. A good report shows five things. The lab’s name is on it. The batch weighs what SS-31 should weigh. It says how pure the batch is, as a percent. The batch number on the report matches the batch you receive, whether it is printed on the vial or on a card or QR code packed with it. And you can check the report with the lab, not just with the seller. If the seller cannot show you all five, buy somewhere else. The technical part below explains the numbers.
What SS-31 is, in plain words
SS-31 is a very small man-made peptide. A peptide is a tiny chain of amino acids. Amino acids are the building blocks of proteins. SS-31 is a chain of just 4 of them. One of the 4 is a changed form of the amino acid tyrosine, with two extra small carbon groups. It comes as a dry white powder in a small glass vial, and labs keep it frozen. Its ID number is CAS 736992-21-5.
The five checks, in order (technical)
1. The laboratory is named on the certificate
“Third-party tested” names nobody. A real certificate of analysis names the laboratory that produced it, carries a report number, and the laboratory will confirm that number if you ask. If a vendor’s page says “independent lab” and stops there, stop there too. Several laboratories in this segment let you confirm a report with them directly. Two examples: Janoshik Analytical, whose results are looked up by code at verify.janoshik.com, and Freedom Diagnostics Testing in Franklin, Tennessee, which publishes reports on its own database with a public lookup by search code. Also check who the report was issued to. A test the vendor ordered on its own stock tells you more than one the factory ordered before the product shipped.
2. Identity by mass spectrometry, and the mass actually matches
SS-31’s sequence is D-Arg-Dmt-Lys-Phe-NH2, where Dmt is 2′,6′-dimethyltyrosine, and its formula is C32H49N9O5. Its monoisotopic mass is 639.39 Da and its average mass is 639.79 Da. A mass-spectrometry result shows the vial holds a molecule of the right mass. The expected numbers are fixed by the formula, so you can check them without trusting anyone. A certificate usually reports the observed value at one of the common charge states:
- [M+H]+ near 640.39
- [M+2H]2+ near 320.70
- [M+3H]3+ near 214.14
The certificate should say which charge state it reports, and the difference between observed and expected should be small. One SS-31-specific trap: the changed tyrosine (Dmt) carries two methyl groups. A version made with plain tyrosine is 28.03 Da lighter, so its [M+H]+ lands near 612.36 instead of 640.39. A certificate with that mass describes a different peptide. Salt form matters for weight, not identity, which is why a good certificate reports identity, purity and net content separately.
A mass match has one limit with this molecule. A different peptide, [Dmt1]DALDA (CAS 255861-98-4), has the same four building blocks in a different order, so it has the same formula and the same mass. Telling the two apart takes a test that reads the order, such as MS/MS fragments, or a match against a reference standard. See what a mass match can’t tell you.
3. Purity by RP-HPLC, as a main-peak percentage with the method named
Purity answers a different question from identity: how much of what is in the vial is the target peptide. The number that holds up is the main-peak area from reverse-phase HPLC, stated as a percentage, with the method printed on the certificate and the chromatogram shown. A “99%” that appears only in marketing copy is just a claim.
4. The lot code on the certificate is the lot code you receive
If the same certificate shows up for every batch, nobody tested your batch. The lot code for the vials you would receive has to appear on the certificate, exactly, and the vial size on the certificate should match the vial size you are buying. If a vendor cannot tell you which lot you would receive and show you that lot’s certificate before you pay, you are buying blind.
5. You can authenticate the certificate with the laboratory, not the seller
This is the step that takes the vendor out of the picture. Enter a Janoshik code at the lab’s own portal and compare. If the portal and the vendor’s copy disagree, the portal wins. A Freedom Diagnostics report lives on the laboratory’s own database under a search code, and the lab will confirm it. If a vendor’s certificates exist only on the vendor’s own site, all you have is a PDF.
Red flags specific to SS-31 listings
- A product page that describes effects or dosing instead of chemistry. That copy tells you what the seller wants to sell, and nothing about what is in the vial.
- A certificate whose mass is about 28 Da below SS-31’s, which points to plain tyrosine instead of Dmt.
- Purity quoted with no chromatogram and no named method.
- A certificate whose vial size does not match the listing.
- No lot code anywhere on the page.
- A “verified” badge or QR code that lands on the vendor’s own page instead of a laboratory record.
Clarion’s last tested SS-31 batch, checked the same way
SS-31 is out of stock. The batch below has sold out.
Read this the way you would read a competitor’s block, and check it against the laboratory rather than against us.
| Lot | 2S10 (the lot line on the certificate), 10 mg vials, sold out. No lot code is printed on our vials. The certificate card packed with each order has a QR code that opens the laboratory’s report. |
| Laboratory | Freedom Diagnostics Testing, Franklin, Tennessee. The certificate names the laboratory and names Clarion Peptides as the client: we sent the sample ourselves. Received July 24, 2026, reported July 28, 2026. |
| Identity | Confirmed by LC-MS. The report labels [M+H]+ at 640.3 and [M+2H]2+ at 320.7, against 640.39 and 320.70 expected. An unlabeled peak at 214.2 also matches [M+3H]3+ (214.14 expected). The report shows these whole-molecule masses but no fragment data, so on its own it cannot rule out [Dmt1]DALDA (see check 2). |
| Purity | 99.83% main peak by HPLC with UV detection, chromatogram on the certificate. |
| Net content | 11.95 mg measured in a 10 mg vial. |
| Authentication | The certificate is on the laboratory’s own database, not our server: coas.freedomdiagnosticstesting.com/Clar2607240049.pdf (search code Clar2607240049). The lot is also on the Public Lot Ledger, and the walkthrough is at clarionpeptides.com/verify/. Certificate page: SS-31 certificate of analysis. |
Lot 2S10 has sold out.
More on reading certificates
A line-by-line guide to any peptide certificate, with a worked example: How to read a peptide certificate of analysis. Expected masses for every compound we carry: Peptide mass reference table.
The check, in one line
Only buy a lot whose certificate you confirmed with the laboratory before paying. If that is ours, the batch is on the Public Lot Ledger linked above. If it is someone else’s, the check works the same way.
All Clarion Peptides products are for laboratory research use only. Not for human or veterinary use. Nothing on this page is a claim about the effects of any compound.
